Alnico 2 Rough Cast Magnet Bar – Raw – Humbucker – P90
Alnico 2 Rough Cast Magnet Bar – Raw – Humbucker – P90
8,90€
Rough cast (raw) Alnico 2 magnet in bar for the manufacture or customization of P90 pickup or PAF Vintage Type Humbucker. Dimensions US 63.5mm * 12.7mm * 3.17mm (2.5 * 0.5 * 0.125 inch)
Out of stock
Get notified when this item comes back in stock
Alnico 2 is composed of 10% Aluminum, 19% Nickel, 13% Cobalt and 3% Copper. The microphones equipped with Alnico 2 magnets have moderate power with very present mids, recessed treble and good sustain. It was very common on the first Humbucker pickups, the Gibson PAFs. The Slash signature microphones or the PAF Antiquity, for example, are equipped with this magnet. It is the most frequently used magnet, along with Alnico 5, for humbucker pickups. Low definition combined with very present mids and a moderate output level make it a perfect choice for vintage blues/rock rhythms as desired.
The appearance of each magnet is unique, photos do not show the magnet you will receive. It's an example.
- A bar of rough cast Alnico 2 magnet
- Exact size of magnets for PAF Vintage and P90 Humbucker
- Dimensions: Length 63.5mm * width 12.7mm * thickness 3.17mm (2.5 * 0.5 * 0.125 inch)
- Magnetized
- North marked
Further information
| Weight | 0.02 kg |
|---|---|
| Dimensions | 6.3 × 1.2 × 0.3cm |
Sold out
Alnico 4 Rough Cast Magnet Bar – Raw – Humbucker – P90
Guitar pickup magnets , Guitar pickup spare parts8,90€
Alnico 4 Rough Cast Magnet Bar – Raw – Humbucker – P90
Guitar pickup magnets , Guitar pickup spare parts
Rough cast (raw) Alnico 4 magnet in bar for the manufacture of P90 pickup or PAF Vintage Type Humbucker. More powerful than the Alnico 2 & 3 but less than the 5, it also sounds more vintage than the latter. Dimensions US 63.5mm * 12.7mm * 3.17mm (2.5 * 0.5 * 0.125 inch)
8,90€
Alnico 5 Rough Cast Magnet Bar for Humbucker & P90
Guitar pickup magnets , Guitar pickup spare parts8,90€
Alnico 5 Rough Cast Magnet Bar for Humbucker & P90
Guitar pickup magnets , Guitar pickup spare parts
Rough cast (raw) Alnico 5 magnet in bar for the manufacture of P90 or Humbucker pickups. Ideal for making Jimmy Page humbuckers up to Hi gain. Dimensions US 63.5mm * 12.7mm * 3.17mm (2.5 * 0.5 * 0.125 inch)
8,90€
Sold out
Alnico 9 Rough Cast Magnet Bar for Humbucker & P90
Guitar pickup magnets , Guitar pickup spare parts12,90€
Alnico 9 Rough Cast Magnet Bar for Humbucker & P90
Guitar pickup magnets , Guitar pickup spare parts
Exclusive in Europe - Rough cast (raw) Alnico 9 magnet in bar for the manufacture of P90 or Humbucker pickups. With an output level equivalent to the Alnico 8, its EQ is different. It brings out the highs much less, enhances the mids and gives more body to the sound. A magnet for Hi gain with a Vintage grain. Dimensions US 63.5mm * 12.7mm * 3.17mm (2.5 * 0.5 * 0.125 inch)
12,90€
Sold out
Alnico 3 Rough Cast Magnet Bar – Raw – Humbucker – P90
Guitar pickup magnets , Guitar pickup spare parts8,90€
Alnico 3 Rough Cast Magnet Bar – Raw – Humbucker – P90
Guitar pickup magnets , Guitar pickup spare parts
Rough cast (raw) Alnico 3 magnet in bar for the manufacture and customization of P90 pickup or PAF Vintage Type Humbucker. The Alnico 3 is the best magnet for a round and warm sound. Dimensions US 63.5mm * 12.7mm * 3.17mm (2.5 * 0.5 * 0.125 inch)
8,90€