Overloaded HSP90 – Hi Gain Humbucker sized P90 pickup Alnico 9

145,00

This Alnico 9 P90 pickup in humbucker format (or HSP90 for Humbucker-Sized P90) packs a punch. The combination of a light overwind with 43 AWG wire (thinner than vintage P90s) and two Alnico 9 magnets (yes, you read that right, a "9") makes it a real little powerhouse.

1. Configuration

(+145,00)

3. Screw

Additional information

Add any necessary information regarding your order

Manufacturing lead time information

Your pickups (s) are made to order.

You will receive an email informing you that your order has gone into production.

Product price: 145,00
Total options:
Total:

This Alnico 9 P90 humbucker (or HSP90 for Humbucker-Sized P90) pickup packs a punch. The combination of a light overwound with 43 AWG wire (thinner than vintage P90s) and two Alnico 9 magnets (yes, you read that right, a "9") makes it a real powerhouse. Alnico 9 delivers power while maintaining a slightly vintage character. It's somewhat the vintage counterpart to the modern Alnico 8.

A P90 that packs a punch

Don't get me wrong, you won't be playing blues/rock with this one; that's not its forte. No, think palm muting and heavy distortion with the typical P90 grit and attack. An atomic mix! The clean tones are ready to twist as soon as you start picking. In distortion, the sound is tight, with tight bass and mids that cut through the mix nicely. The highs are slightly recessed but benefit from the P90 grit in the attack—a real treat. Install it in a light guitar that lacks a bit of body to transform it into a true monster. Ready for the grind! The neck pickup is a souped-up version of the Pistol HSP90, using only Alnico 5, for beautiful highs and round, full bass.

Sound profile

Micro neck

Bass
Mids
Treble
Power

Bridge microphone

Bass
Mids
Treble
Power
Set of 2 pickups , either bridge pickup or neck pickup
Resistance: neck 10kOhms - bridge 12.5kOhms
Humbucker sized P90 pickup
Alnico 9 magnets for the bridge - Alnico 5 for the neck
Screw and stud spacing (from E to E) 50 mm.
Supplied with 2 mounting screws and 2 springs per microphone
Wire length of 35/38cm
Vintage braided 2-conductor cable or 2 shielded conductors + ground for easy alternative connections
Supplied with 1 nickel/silver cover with several possible finishes: raw nickel/silver, nickel, matte black, gold, or open cover with a black or wooden top upon request
For more finishing options (open hood, stainless steel grille, etc.), please contact me.

Discover also